Influence of Polyfluorinated Side Chains and Soft-Template Method on the Surface Morphologies and Hydrophobic Properties of Electrodeposited Films from Fluorene Bridged Dicarbazole Monomers.

A clear case of relationship between the monomer molecular structure and the capability of tuning the morphology of electrodeposited gas bubbles template polymer thin films is shown. To this end, a series of fluorene-bridged dicarbazole derivatives containing either linear or terminally branched polyfluorinated side chains connected to the fluorene subunit were synthesized and their electrochemical properties were investigated. The new compounds underwent electrochemical polymerization over indium tin oxide electrodes to give hydrophobic films with nanostructural and morphological properties strongly dependent on the nature of the side chains. Gas bubbles templated electropolymerization was next achieved by the addition of tiny amounts of water to the monomer solutions, without using surfactants. Within the investigated set of molecules, the nanostructural properties of the soft-templated films obtained from monomers bearing linear side chains could be fine-tuned by adjusting electrochemical parameters, leading to superhydrophobic surfaces.

Asymmetrically Substituted 10H,10'H-9,9'-Spirobi[acridine] Derivatives as Hole-Transporting Materials for Perovskite Solar Cells.

Hole-transporting materials (HTMs) based on the 10H, 10'H-9,9'-spirobi [acridine] core (BSA50 and BSA51) were synthesized, and their electronic properties were explored. Experimental and theoretical studies show that the presence of rigid 3,6-dimethoxy-9H-carbazole moieties in BSA 50 brings about improved hole mobility and higher work function compared to bis(4-methoxyphenyl)amine units in BSA51, which increase interfacial hole transportation from perovskite to HTM. As a result, perovskite solar cells (PSCs) based on BSA50 boost power conversion efficiency (PCE) to 22.65 %, and a PSC module using BSA50 HTM exhibits a PCE of 21.35 % (6.5×7 cm) with a Voc of 8.761 V and FF of 79.1 %. The unencapsulated PSCs exhibit superior stability to devices employing spiro-OMeTAD, retaining nearly 90 % of their initial efficiency after 1000 h operation output. This work demonstrates the high potential of molecularly engineered spirobi[acridine] derivatives as HTMs as replacements for spiro-OMeTAD.

Spatial Charge Separation as the Origin of Anomalous Stark Effect in Fluorous 2D Hybrid Perovskites.

2D hybrid perovskites (2DP) are versatile materials, whose electronic and optical properties can be tuned through the nature of the organic cations (even when those are seemingly electronically inert). Here, it is demonstrated that fluorination of the organic ligands yields glassy 2DP materials featuring long-lived correlated electron-hole pairs. Such states have a marked charge-transfer character, as revealed by the persistent Stark effect in the form of a second derivative in electroabsorption. Modeling shows that electrostatic effects associated with fluorination, combined with the steric hindrance due to the bulky side groups, drive the formation of spatially dislocated charge pairs with reduced recombination rates. This work enriches and broadens the current knowledge of the photophysics of 2DP, which will hopefully guide synthesis efforts toward novel materials with improved functionalities.

Vacuum-Induced Degradation of 2D Perovskites.

Two-dimensional (2D) hybrid organic-inorganic perovskites have recently attracted the attention of the scientific community due to their exciting optical and electronic properties as well as enhanced stability upon exposure to environmental factors. In this work, we investigate 2D perovskite layers with a range of organic cations and report on the Achilles heel of these materials-their significant degradation upon exposure to vacuum. We demonstrate that vacuum exposure induces the formation of a metallic lead species, accompanied by a loss of the organic cation from the perovskite. We investigate the dynamics of this reaction, as well as the influence of other factors, such as X-ray irradiation. Furthermore, we characterize the effect of degradation on the microstructure of the 2D layers. Our study highlights that despite earlier reports, 2D perovskites may exhibit instabilities, the chemistry of which should be identified and investigated in order to develop suitable mitigation strategies.

Zinc phthalocyanines as light harvesters for SnO2-based solar cells: a case study.

SnO2 nanoparticles have been synthesized and used as electron transport material (ETM) in dye sensitized solar cells (DSSCs), featuring two peripherally substituted push-pull zinc phthalocyanines (ZnPcs) bearing electron donating diphenylamine substituents and carboxylic acid anchoring groups as light harvesters. These complexes were designed on the base of previous computational studies suggesting that the integration of secondary amines as donor groups in the structure of unsymmetrical ZnPcs might enhance photovoltaics performances of DSSCs. In the case of TiO2-based devices, this hypothesis has been recently questioned by experimental results. Herein we show that the same holds for SnO2, despite the optimal matching of the optoelectronic characteristics of the synthesized nanoparticles and diphenylamino-substituted ZnPcs, thus confirming that other parameters heavily affect the solar cells performances and should be carefully taken into account when designing materials for photovoltaic applications.

Improving the Electropolymerization Properties of Fluorene-Bridged Dicarbazole Monomers through Polyfluoroalkyl Side Chains.

The facile functionalization of the fluorene scaffold at the 2,7-positions was utilized to provide access to two soluble carbazole-π-carbazole derivatives CFC-H1 and CFC-F1 featuring fully hydrogenated and polyfluorinated alkyl chains at the 9-position of the fluorene π-bridging unit, respectively. The optical and electrochemical properties of the new dicarbazoles were investigated. Their electrochemical polymerization over Pt and indium tin oxide electrodes allowed the generation of electroactive polymeric films, whose physicochemical characteristics were strongly dependent on the kind of alkyl chain present on the fluorene bridge. In particular, the electropolymerization of the polyfluorinated monomer allowed the fabrication of thin films with good electrical conductivity, reversible electrochemical processes, good electrochromic properties, and enhanced water repellency with respect to its nonfluorinated analogue.

BODIPY Dyes Bearing Multibranched Fluorinated Chains: Synthesis, Structural, and Spectroscopic Studies.

A small series of boron-dipyrromethene (BODIPY) dyes, characterized by the presence of multibranched fluorinated residues, were designed and synthesized. The dyes differ in both the position (para-perfluoroalkoxy-substituted phenyl ring or boron functionalization) and number of magnetically equivalent fluorine atoms (27 or 54 fluorine atoms per molecule). Photophysical and crystallographic characterization of the synthesized BODIPYs was carried out to evaluate the effect of the presence of highly fluorinated moieties on the optical and morphological properties of such compounds.

Fluorination of Organic Spacer Impacts on the Structural and Optical Response of 2D Perovskites.

Low-dimensional hybrid perovskites have triggered significant research interest due to their intrinsically tunable optoelectronic properties and technologically relevant material stability. In particular, the role of the organic spacer on the inherent structural and optical features in two-dimensional (2D) perovskites is paramount for material optimization. To obtain a deeper understanding of the relationship between spacers and the corresponding 2D perovskite film properties, we explore the influence of the partial substitution of hydrogen atoms by fluorine in an alkylammonium organic cation, resulting in (Lc)2PbI4 and (Lf)2PbI4 2D perovskites, respectively. Consequently, optical analysis reveals a clear 0.2 eV blue-shift in the excitonic position at room temperature. This result can be mainly attributed to a band gap opening, with negligible effects on the exciton binding energy. According to Density Functional Theory (DFT) calculations, the band gap increases due to a larger distortion of the structure that decreases the atomic overlap of the wavefunctions and correspondingly bandwidth of the valence and conduction bands. In addition, fluorination impacts the structural rigidity of the 2D perovskite, resulting in a stable structure at room temperature and the absence of phase transitions at a low temperature, in contrast to the widely reported polymorphism in some non-fluorinated materials that exhibit such a phase transition. This indicates that a small perturbation in the material structure can strongly influence the overall structural stability and related phase transition of 2D perovskites, making them more robust to any phase change. This work provides key information on how the fluorine content in organic spacer influence the structural distortion of 2D perovskites and their optical properties which possess remarkable importance for future optoelectronic applications, for instance in the field of light-emitting devices or sensors.

Water-Repellent Low-Dimensional Fluorous Perovskite as Interfacial Coating for 20% Efficient Solar Cells.

Hybrid perovskite solar cells have been capturing an enormous research interest in the energy sector due to their extraordinary performances and ease of fabrication. However, low device lifetime, mainly due to material and device degradation upon water exposure, challenges their near-future commercialization. Here, we synthesized a new fluorous organic cation used as organic spacer to form a low-dimensional perovskite (LDP) with an enhanced water-resistant character. The LDP is integrated with three-dimensional (3D) perovskite absorbers in the form of MA0.9FA0.1PbI3 (FA = NH2CH = NH2+, MA = CH3NH3+) and Cs0.1FA0.74MA0.13PbI2.48Br0.39. In both cases, a LDP layer self-assembles as a thin capping layer on the top of the 3D bulk, making the perovskite surface hydrophobic. Our easy and robust approach, validated for different perovskite compositions, limits the interface deterioration in perovskite solar cells yielding to >20% power conversion efficient solar cells with improved stability, especially pronounced in the first hours of functioning under environmental conditions. As a consequence, single and multijunction perovskite devices, such as tandem solar cells, can benefit from the use of the waterproof stabilization here demonstrated, a concept which can be further expanded in the perovskite optoelectronic industry beyond photovoltaics.

Dye-sensitized solar cells based on a push-pull zinc phthalocyanine bearing diphenylamine donor groups: computational predictions face experimental reality.

Computational studies have suggested that the integration of secondary amine as donor groups in the structure of unsymmetrical zinc phthalocyanine (ZnPc) should have positive effects on photovoltaic performance, once the molecule is integrated as light harvester in dye sensitized solar cells (DSSCs). Aiming at obtaining experimental confirmation, we synthesized a peripherally substituted push-pull ZnPc bearing three electron donating diphenylamine substituents and a carboxylic acid anchoring group and integrated it as sensitizer in TiO2-based DSSCs. Detailed functional characterization of solar energy converting devices resulted in ruling out the original hypothesis. The causes of this discrepancy have been highlighted, leading to a better understanding of the conditions for an effective design of push-pull diarylamino substituted ZnPcs for DSSCs.

Femtosecond Charge-Injection Dynamics at Hybrid Perovskite Interfaces.

With a power conversion efficiency (PCE) exceeding 22 %, perovskite solar cells (PSCs) have thrilled photovoltaic research. However, the interface behavior is still not understood and is a hot topic of research: different processes occur over a hierarchy of timescales, from femtoseconds to seconds, which makes perovskite interface physics intriguing. Herein, through femtosecond transient absorption spectroscopy with spectral coverage extending into the crucial IR region, the ultrafast interface-specific processes at standard and newly molecularly engineered perovskite interfaces in state-of-the-art PSCs are interrogated. Ultrafast interfacial charge injection occurs with a time constant of 100 fs, resulting in hot transfer from energetic charges and setting the timescale for the first step involved in the complex charge-transfer process. This is also true for 20 % efficient devices measured under real operation, for which the femtosecond injection is followed by a slower picosecond component. These findings provide compelling evidence for the femtosecond interfacial charge-injection step and demonstrate a robust method for the straightforward identification of interfacial non-equilibrium processes on the ultrafast timescale.

Synthesis and photovoltaic applications of a 4,4'-spirobi[cyclopenta[2,1-b;3,4-b']dithiophene]-bridged donor/acceptor dye.

A new donor/acceptor (D-A) spiro dye (SCPDT1) featuring two bithiophene units, connected through an sp(3)-hybridized carbon atom, was prepared by a multistep synthetic sequence involving the convenient assembly of the spiro system under mild catalytic conditions. The photocurrent spectrum of dye-sensitized solar cells incorporating SCPDT1 covers the spectral region ranging from 350 to 700 nm and reaches a wide maximum of ~80% in the 420-560 nm range. Power conversion efficiencies of up to 6.02% were obtained.

A highly sensitive luminescent lectin sensor based on an α-D-mannose substituted Tb3+ antenna complex.

Lectin-carbohydrate interactions are the basis of many biological processes and essentially they constitute the language through which intercellular communications are codified. Thus they represent powerful tools in the examination and interpretation of changes that occur on cell surfaces during both physiological and, more importantly, pathological events. The development of optical techniques that exploit the unique properties of luminescent lanthanoid metal complexes in the investigation of lectin-carbohydrate recognition can foster research in the field of ratiometric biosensing and disease detection. Here we report the synthesis of a Tb(3+)-DO3A complex (Tb⊂1) bearing an α-D-mannose residue and the related study of binding affinity with concanavalin A (Con A) labeled with rhodamine-B-isothiocyanate (RITC-Con A). Luminescence spectroscopy and dynamic studies show changes in emission spectra that can be ascribed to a luminescence resonance energy transfer (LRET) from Tb⊂1 (donor) to RITC-Con A (acceptor). The binding constant value between the two species was found to be one order of magnitude larger than those previously reported for similar types of recognition. To the best of our knowledge this is the first example of the use of a pre-organized luminescent lanthanoid complex in the study of carbohydrate-protein interactions by LRET.

Dinuclear Cu(II) complexes of isomeric bis-(3-acetylacetonate)benzene ligands: synthesis, structure, and magnetic properties.

Highly versatile coordinating ligands are designed and synthesized with two ß-diketonate groups linked at the carbon 3 through a phenyl ring. The rigid aromatic spacer is introduced in the molecules to orient the two acetylacetone units along different angles and coordination vectors. The resulting para, meta, and ortho bis-(3-acetylacetonate)benzene ligands show efficient chelating properties toward Cu(II) ions. In the presence of 2,2'-bipyridine, they promptly react and yield three dimers, 1, 2, and 3, with the bis-acetylacetonate unit in bridging position between two metal centers. X-ray single crystal diffraction shows that the compounds form supramolecular chains in the solid state because of intermolecular interactions. Each of the dinuclear complexes shows a magnetic behavior which is determined by the combination of structural parameters and spin polarization effects. Notably, the para derivative (1) displays a moderate antiferromagnetic coupling (J = -3.3 cm(-1)) along a remarkably long Cu···Cu distance (12.30 Å).

A templating guest sorts out a molecular triangle from a dimer-trimer constitutional dynamic library.

Cu(II) and a bis-ß-diketone ligand generate a small constitutional dynamic library (CDL). The designed introduction of a well suited guest drives the self-sorting of the system toward a supramolecular triangle. Alternatively, the triangle self-assembly is templated by the same guest in a one-pot synthesis.

Polar fluorenes and spirobifluorenes: fluorescence and fluorescence anisotropy spectra.

An extensive spectroscopic study is presented of two asymmetrically substituted fluorene dyes and of the related spiro dimers in both liquid and glassy solvents. Essential-state models are developed to accurately reproduce linear absorption and fluorescence spectra and their complex dependence on solvent polarity. The same models are exploited to quantitatively calculate fluorescence excitation and anisotropy spectra in rigid matrixes. Impressive red-edge effects observed for spiro dimers in glassy polar solvents are accurately reproduced and understood. Interchromophore interactions in the spiro dimers are very small, leading to marginal effects in absorption and fluorescence spectra, but they effectively promote energy transfer between the two chromophores, as best evidenced comparing anisotropy spectra of the substituted fluorenes and of corresponding spiro dimers dissolved in glassy solvent matrixes.

Very mild, enantioselective synthesis of propargylamines catalyzed by copper(I)-bisimine complexes.

The stereoselective addition of aryl- and alkylacetylene derivatives to imines was studied. The reaction is catalyzed by copper complexes of enantiomerically pure bisimines, readily prepared in very high yields from the commercially available binaphthyl diamine. A very simple experimental procedure allowed to obtain at room temperature optically active propargylamines in high yields and enantioselectivity. Interestingly, bisimine/copper(I) complexes were able to promote the direct, enantioselective, catalytic addition to imines of alkylacetylenes. The effects of catalyst loading and other reaction parameters on the stereochemical outcome of the transformation were investigated. The extremely convenient methodology, the mild reaction conditions, and the possibility of a modular approach for developing new and more efficient bisimine-based chiral ligands make the present methodology very attractive.

A reusable, insoluble polymer-bound bis(oxazoline) (IPB-box) for highly enantioselective heterogeneous cyclopropanation reactions.

A reusable, insoluble polystyrene-supported bis(oxazoline) was developed, affording e.e.s > 90% in the heterogeneous enantioselective cyclopropanation of styrene and 1,1-disubstituted alkenes with ethyl diazoacetate.

An Insoluble Polymer-Bound Bis-Oxazoline Copper(II) Complex: A Highly Efficient Heterogeneous Catalyst for the Enantioselective Mukaiyama Aldol Reaction.

The polystyrene-supported bis-oxazoline 1 forms a complex with copper(II)triflate that is a highly effective catalyst for the heterogeneously catalyzed enantioselective Mukaiyama aldol reaction of silylthioketene acetals with methyl pyruvate (ca. 90 % yield, ca. 90 % ee). The catalyst can be recovered by simple filtration and reused several times without a decline in enantioselectivity.